PDA Technical Glossary

A process parameter whose variability has an impact on a critical quality attribute and therefore should be monitored or controlled to ensure the process produces the desired quality. (TR60) A process parameter whose variability has an impact on critical quality attribute and therefore should be monitored or controlled to ensure the process produces the desired quality. (TR74)

An input process parameter that should be carefully controlled within a narrow range and is essential for process performance. A key process parameter does not affect product quality attributes. If the acceptable range is exceeded, it may affect the process (e.g. yield, duration) but not product quality. (TR60)

An input variable or condition of the manufacturing process that can be directly controlled in the process. Typically, these parameters are physical or chemical (e.g. temperature, process time, column flow rate, column wash volume, reagent concentration, or buffer pH). (TR60)

Development of a production strategy for a new drug starting from manufacturing processes similar to those used to manufacture other drugs of the same type (the production for which there already exists considerable experience). (TR60)

A system for designing, analyzing, and controlling manufacturing through timely measurements (i.e., during processing) of critical quality and performance attributes of raw and in-process materials and processes with the goal of ensuring final product quality. (TR60) (TR60-2)

Studies performed during process development to establish acceptable ranges for key input vari­ables and critical operational parameters that de­fine the process design space. (TR56) A study that evaluates the process to increase process knowledge and examines proposed ranges and their individual and/or combined impact on target protein quality. Process characterization studies include deliberate variation of parameters to determine their effect on product quality attributes, often conducted as small-scale studies. (Also known as process evaluation studies, process justification studies, engineering studies, development studies, robustness studies, or process design studies. (TR60)

A written plan preapproved by the quality unit that specifies critical steps, controls, and measurements. The process performance qualification protocol states how process performance qualification or other validation studies will be conducted, identifying sampling, assays, specific acceptance criteria, production equipment, and operating ranges. Results obtained for each study described in the protocol should be evaluated in an associated process validation report. (TR60)

Documented verification that a system is capable of consistently performing or controlling the activities of the processes it is required to perform or control, according to written and preapproved specifications, while operating in its specified operating environment. (TR3) Confirming that the manufacturing process as designed is capable of reproducible commercial manufacturing. (TR54) (TR60) (TR54-5)

Ability of a process to tolerate variability of materials and changes of the process and equipment without negative impact on quality. (TR60)

The documented evidence that the process, operated within established parameters, can perform effectively and reproducibly to produce a medicinal product meeting its predetermined specifications and quality attributes. (TR60) (TR54-5)

A document that defines the process validation scope and rationale and that contains the list of process validation studies to be performed (Synonym: Validation Master Plan). (TR42) (TR60) The plan that documents rationale for the approach to validation and lists all systems and their validation status. (Note: The VMP can be used to document the rationale for number of monitors and revalidation frequency, as well as other system justifications). (TR52)