PDA Technical Glossary
Home / PDA Technical Glossary

PDA Technical Glossary

PDA Technical Reports are highly valued membership benefits because they offer expert guidance and opinions on important scientific and regulatory topics and are used as essential references by industry and regulatory authorities around the world. These reports include terms which explain the material and enhance the reader’s understanding.

The database presented here includes the glossary terms from all current technical reports. The database is searchable by keyword, topic, or by technical report. Each definition provided includes a link to the source technical report within the  PDA Technical Report Portal.

(Please select "All" to restart a filtered Search)

Refine Results
Filter By Technical Report Number
Filter By Technical Report Keyword
Filter By Technical Report Category
GMP/Good Manufacturing Processes/cGMP
Accelerated Stability Testing
Studies designed to increase the rate of chemical degradation or physical change of a drug substance or drug product by using exaggerated storage conditions as part of the formal stability studies. (TR57-2)
Source:
Acceptable Daily Exposure
A dose that is unlikely to cause an adverse effect if an individual is exposed, by any route, at or below this dose every day for a lifetime. (TR29)
Source:
Acceptable Daily Intake
An amount of a substance consumed on a daily basis that is considered at a safe level. (TR29) An amount of a substance administered or consumed on a daily basis that is considered a safe level. (TR49)
Source:
Acceptable Quality Limit (AQL)
The quality level that is the worst-tolerable process average when a continuing series of lots are submitted for acceptance sampling. (TR43) (TR 76)
Source:
Acceptable Range
The extent to which, or the limits between which, acceptable variation exists.(TR38)
Source:
Acceptance Limit
The maximum amount of residue allowed in a product, in an analytical sample, or as an amount per surface area. (TR29)
Source:
Accuracy
The closeness of the actual test results obtained by the new method to the actual test results obtained by the existing method. (TR33) An analytical procedure expresses the closeness of agreement between the value that is accepted either as a conventional true value or an accepted reference value and the value found. This is sometimes termed trueness. (TR57)
Source:
Action Level
An established microbial or airborne particle level that, when exceeded, indicates a process is outside of its normal operating range. A response to such an excursion should involve a documented investigation and corrective actions based on the results of that investigation. (TR13) An established microbial or non-viable particle level that, when exceeded, should trigger appropriate investigation and corrective action based on the investigation. (TR22) An established microbial or airborne particle level for environmental, water or gas monitoring that, when exceeded, indicates that a facility process is outside of its normal operating range. The response to such an excursion involves a documented investigation and corrective actions based on the results of that investigation. The prescribed action level is often specified in guidance or standards relating to environmental monitoring and water quality. (TR69) An established microbial or nonviable particle level for environmental, water, or gas monitoring that, when exceeded, indicates a facility or process is outside of its normal operating range. The response to such an excursion may involve a documented investigation and corrective actions based on the results. The prescribed action level is often specified in guidances or standards relating to environmental monitoring and water quality (3-6). (TR88)
Source:
Action Level (environmental monitoring)
An established microbial or non-viable particle level that, when exceeded, should trigger appropriate investigation and corrective action based on the investigation. (TR22)
Source:
Action Limit
An internal (in-house) value used to assess the consistency of the process. The cause of the excursion should be investigated and documented and corrective action is generally required. Action limits are not specifications. (TR42) An established internal (in-house) data-based value which is part of the control strategy and used to assess the consistency of the manufacturing process. An action limit excursion result in an investigation, identification of recovered isolates, root-cause analysis, assessment of a systemic failure and impact on product quality and patient safety. (TR69) An established internal (in-house) data-based value that is part of the control strategy and used to assess the consistency of the manufacturing process. An action limit excursion result in an investigation, identification of recovered isolates, root-cause analysis, assessment of a systemic failure and impact on product quality and patient safety. (TR74) A limit that, when exceeded, indicates a process is outside of its normal operating range. A response to such an excursion should involve a documented investigation and corrective actions based on the results of that investigation. (TR60)
Source:
Action Plan
A written plan consisting of elements to be accomplished to achieve a specific result. The plan describes responsibility for each element and a target date for completion. (TR22)
Source:
Active Pharmaceutical Ingredient (API)
Synonym: Drug Substance. (TR14) (TR42) A substance or mixture of substances that, when delivered in a finished drug product, directly affects the structure or function of the body. (TR54-4) Any substance or mixture of substance intended to be used in the manufacture of a drug (medicinal) product and that, when used in the production of a drug, becomes an active ingredient of the drug product. Such substances are intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure and function of the body. Note: also known as Drug Substance. (TR29) (TR56) (TR41) (TR54-3) (TR60) Any substance or mixture of substances intended to be used in the compounding of a drug preparation, thereby becoming the active ingredient in that preparation and furnishing pharmacological activity o other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease in humans and animals or affecting the structure and function of the body. (TR63) (TR70) Any substance or mixture of substances intended to be used in the manufacture of a drug product, and that when used in the production of a drug, becomes an active ingredient in the drug product. Such substances are intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment or prevention of disease, or to affect the structure and function of the body. (TR74)
Source:
Active Pharmaceutical Ingredient (API) Equivalent to Drug Substance for large molecules
Any substance or mixture of substances intended to be used in the manufacture of a drug (medicinal) product and that, when used in the production of drug, becomes an active ingredient of the drug product. Such substances are intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure and function of the body. (TR60)
Source:
Active Pharmaceutical Ingredient (API) Starting Material
A raw material, intermediate, or an API that is used in the production of an API and that is incorporated as a significant structural fragment into the structure of the API. An API Starting Material can be an article of commerce, a material purchased from one or more suppliers under contract or commercial agreement, or produced in-house. API Starting Materials normally have defined chemical properties and structures. (TR60)
Source:
Active Pharmaceutical Ingredient (API) or (Drug substance)
Any substance or mixture of substances intended to be used in the manufacture of a drug (medicinal) product and when used in the production of a drug, becomes an active ingredient of the drug product (also called “drug substance”). (TR29) Any substance or mixture of substances intended to be used in the manufacture of a drug (medicinal) product and that, when used in the production of a drug, becomes an active ingredient in the drug product. Such substances are intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure and function of the body. (TR54-3) Any substance or mixture of substances intended to be used in the compounding of a drug preparation, thereby becoming the active ingredient in that preparation and furnishing pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease in humans and animals or affecting the structure and function of the body. (TR63)
Source:
Activity
Ability of endotoxin (LPS) to initiate the LAL cascade in the compendial bacterial endotoxins test (BET) assay, or the ability to elicit a pyrogenic response in a compendial pyrogen test (2,10). Activity can be measured by other assays such as the monocyte activation test (MAT) or recombinant Factor C tests (rFc), if such tests have been validated, to demonstrate that decisions made from the results are comparable to or superior to the compendial assay. Activity is measured in endotoxin units (EU). In terms of activity, one EU = one IU, regardless of the source. Activity is generally expressed as a concentration, usually EU/mL.(TR82)
Source:
Advanced Aseptic Process
A process in which direct intervention with open product containers or exposed product contact surfaces by operators wearing conventional cleanroom garments is not required and never permitted. (TR77)
Source:
Adventitious Agents
A foreign material that is introduced inadvertently; not natural or hereditary (as in microbial, chemical, or biochemical contamination of a purified substance). (TR 69)
Source:
Adverse Event (AE) Report
An AE report is a communication to the U.S. FDA of an undesirable sign or symptom associated with use of a drug as required and detailed by 21 CFR 314.80. These reports are logged into the U.S. FDA’s Adverse Event Reporting System (AERS). Drug manufacturers are required to report adverse event information to FDA. These reports may also may be voluntarily submitted to the FDA directly by healthcare professionals or the general public at Med Watch. The reports are reviewed, safety issues are monitored, and data are periodically analyzed and assessed by the Center for Drug Evaluation and Research (CDER). (TR55)
Source:
Adverse Trend
A series of alert-level or action-level excursions that indicates the system or areas are not in control and have the potential to affect the product quality. (TR 70) An increase in the frequency of alert- and action-level excursions or repeated recovery of low levels of microorganisms below the alert level during microbial monitoring or of pharmaceutical ingredient or finished product failure that is indicative of a loss of process control. (TR88)
Source:
Aerobic Microorganism
A microorganism that utilizes oxygen as the final electron acceptor during metabolism; a microorganism that will grow primarily in the presence of oxygen. For the purpose of this report, this definition encompasses facultative anaerobes. (TR22) (TR62)
Source:
Aggregation
Clumping of proteins, viruses, or bacteria that may arise from several mechanisms and may be classified in numerous ways, including soluble/insoluble, covalent/noncovalent, reversible/irreversible, and native/denatured. (TR47)
Source:
Air Removal Test
A test used to evaluate air removal and steam penetration in an empty sterilizer that is used for porous/hard goods load sterilization (e.g., Bowie-Dick Test, DART, Lantor Cube, Browns’ Test). (TR01) (TR 48)
Source:
Airborne Particulate Count (Total Particulate Count)
The total number of particles of a specific size per unit volume of air. (TR13)
Source:
Airborne Viable Particulate Count (Total Airborne Aerobic Microbial Count)
The total number of particles of a specific size per unit volume of air. (TR13)
Source:
Airlock
A room that controls the airflow between two rooms of different classification. (TR 70)
Source:
Alert Level
An established microbial or nonviable particle level giving early warning of potential drift from normal operating conditions; not necessarily grounds for definitive corrective action but typically requires follow-up investigation. (TR13) (TR22) (TR69) An established level that, when exceeded, is giving an early warning of a potential drift from normal operating conditions; while not necessarily grounds for definitive corrective action, it typically requires follow-up review. (TR 60) An established microbial or nonviable particle level giving early warning of potential drift from normal operating conditions; not necessarily grounds for definitive corrective action, but typically requires follow-up investigation (3, 4, 7). (TR88)
Source:
Alert Limit
An established internal (in-house) data-based value giving early warning of potential drift of manufacturing process from normal operating conditions and triggers appropriate follow-up investigations. Alert limits are always lower than action limits. (TR69)
Source:
Alternative or Rapid Microbiological Method (RMM)
A novel, modern and/or fast microbiological testing method that is different from a classical or traditional growth-based method, such as agar-plate counting or recovery in liquid broth media. The alternative or rapid method may utilize instrumentation and software to manage the testing and resulting data, and may provide quantitative, qualitative and/or microbial identification test results. Automated technologies that utilize classical growth-based methods may also be designated as being novel, modern or rapid, based on their scientific principle and approach to microbial detection. The terms alternative, rapid microbiological method, rapid method and the acronym RMM are used interchangeably within this technical report. (TR33)
Source:
Anaerobic Microorganism
A microorganism that does not utilize oxygen as the final electron acceptor during metabolism; microorganism that will grow only in the absence of oxygen. (TR62)(TR22)
Source:
Animal-Derived Raw Materials (Primary)
Contains in the final raw material or uses in the manufacturing process of the final raw material, any raw material derived directly from bovine or other animal tissues, for example, bovine serum, porcine-derived trypsin, and animal-tissue-de­rived hydrolysates. (TR83)
Source:
Animal-Derived Raw Materials (Secondary)
Non-animal in origin but may be derived from processes that include materials from animal components that come in direct contact with the raw material, for example, a recombinant protein produced in an E. coli fermentation that uses fermentation medium containing tryptone, or a recombinant protein expressed in plants that are exposed to bovine manure fertilizer. (TR83)
Source:
Animal-Derived Raw Materials (Tertiary)
Sourced from synthetic components but in­cludes animal-derived components used dur­ing the manufacture of the raw material that do not come in direct contact with the raw mate­rial, for example, polymers or elastomers used in process equipment or plumbing that may contain or may have been exposed to animal-sourced materials such as stearates or slip agents. (TR83)
Source:
Anisotropic (Asymmetric) Membrane
A membrane in which the pore size and structure differ from one face to the other. These membranes are usually considered “directional” because of the difference in flow characteristics, depending on which surface of the membrane faces the feed stream. (TR15)
Source:
Annual Product Review
GMP-mandated evaluation of the standards for each active pharmaceutical ingredient (API), drug product or biologics to determine the need for changes in drug product specifications and/ or manufacturing, control procedures or manu­facturing processes. (TR54-5)
Source:
Antimicrobial Chemical Agent
Substance used to destroy or suppress the growth of microorganisms, whether bacteria, fungi, or viruses, on inanimate objects and surfaces. (TR70)
Source:
Archival (MHRA )
A designated secure area or facility (e.g., cabinet, room, building or computerised system) for the long-term retention of data and metadata for the purposes of verification of the process or activity.(TR80)
Source:
Area Disinfection
Disinfection of floors, walls, ceilings, and other surfaces. (TR70)
Source:
Aseptic Processing
Handling sterile materials in a controlled environment, in which the air supply, facility, materials, equipment and personnel are regulated to control microbial and particulate contamination to acceptable levels. (TR28) (TR62) (TR69) Handling of sterile product, containers, and/ or devices in a controlled environment in which the air supply, materials, equipment, and personnel are regulated to maintain (product) sterility. (TR13)
Source:
Aseptic Processing Area (APA)
Controlled environment, consisting of several zones, in which the air supply, facility, materials, equipment and personnel are regulated to control microbial and particulate contamination to acceptable levels. (TR22) (TR28) (TR62) (TR70)
Source:
Aseptic Processing Simulation (APS)
A means for establishing the capability of an aseptic process as performed using a growth medium. (TR22) (TR62)
Source:
Assess the Effects of the Change
To evaluate the effects of a manufacturing change on the identity, strength, quality, purity, and potency of a drug product as those factors may relate to the safety or effectiveness of the drug product. (TR38)
Source:
Attachment (Adhesion)
Discrete association of a microorganism with an animate or inanimate surface. (TR69)
Source:
Attribute
A physical, chemical, or microbiological property or characteristic of an input or output material. (TR60)
Source:
Attributes (Process Performance Attribute)
An output variable or outcome that cannot be directly controlled, but is an indicator that the process performed as expected.(Synonym - Process Performance Parameter) (TR60)
Source:
Attributes (Quality Attribute)
A molecular or product characteristic that is selected for its ability to indicate the quality of the product. Collectively, the quality attributes define identity, purity, potency and stability of the product, and safety with respect to adventitious agents. Specifications measure a selected subset of the quality attributes. (TR60)
Source:
Audit Trail (WHO)
The audit trail is a form of metadata that contains information associated with actions that relate to the creation, modification or deletion of GXP records. An audit trail provides for secure recording of life-cycle details such as creation, additions, deletions, or alterations of information in a record, either paper or electronic, without obscuring or overwriting the original record.(TR80)
Source:
Automated Inspection
Consists of mechanical handling and presenta­tion of product containers combined with auto­mated inspection of the filled containers using image analysis and/or light obscuration. (TR79)
Source:
BLAST
Basic Local Alignment Search Tool; a bioinformatics algorithm for the comparison of sequence data (e.g., translated amino acids [tBLASTx], proteins [BLASTx], or nucleotides [BLASTn]). (TR 71)
Source:
Backstop (Finger Plate or Thumb Plate)
Feature that enhances the area to hold the syringe and is usually designed to avoid accidental removal of the plunger from the back. By design, it may also serve as a flange extender to facilitate holding of the syringe during injection. (TR 73)
Source: