PDA Technical Glossary

The closeness of the actual test results obtained by the new method to the actual test results obtained by the existing method. (TR33) An analytical procedure expresses the closeness of agreement between the value that is accepted either as a conventional true value or an accepted reference value and the value found. This is sometimes termed trueness. (TR57)

A general statistical approach to data analysis (i.e., comparison of means) in which the variation in a method’s results is partitioned among explanatory factors in order to systematically assess factor influence and/or variance components. (TR57)

Substance (usually a residue) for which an analysis is being performed. (TR29) (TR49) (TR70) A specific chemical moiety being measured, which can be intact drug, biomolecule or its derivative, impurity, and/or excipients in a drug product. [Synonym: measurand] (TR57)

The qualification of the analytical instrument(s) used as part of the analytical procedure. (TR57)

Equivalence study that measure the same property of two methods and that shows that replacing one of these methods with the other would not adversely affect the test’s use or results. (TR57-2)

An analytical method that is used for multiple products and/or types of sample matrix without modification of the procedure. Similar to compendial methods, an APT method may not require full validation for each new product or sample type. (TR57)

That which is performed in order to obtain a reportable result. The procedure should describe in detail the steps necessary to perform the analytical test. This may include but is not limited to: the sample, the reference standard and the reagents preparations, use of the apparatus, generations of the calibration curve, use of the formulae for the calculation [Synonym: Method, Assay] (TR57)

A systematic difference in a method that manifests itself as a deviation of the method mean from an expected value. (TR57) Total systematic error, in contrast to random error. Measurement centered on the true result is said to be unbiased or have no systematic error. The distance between the center of a large (infinite) number of measurements and the correct value is the bias. (TR 57-2)

A method used to assess the presence of analytes (chemical or biological) in biological samples (e.g., serum, plasma, etc.). (TR57)

Analysis (as of a drug) to quantify the biological activity(ies) of one or more components by determining its capacity for producing an expected biological activity. (TR57)

Property that describes the specific ability or capacity of a product to achieve a defined biological effect. (TR57)

A method that is considered validated as published in one of the recognized compendia. (TR57)

Any adventitiously or externally introduced material(s) (e.g., chemical, biochemical, or microbial species) not intended to be part of the process. (TR14) (TR15) (TR70) An undesired impurity of a chemical or microbiological nature that is introduced into a raw material, intermediate, or API (drug substance) during manufacture. (TR14) (TR15) Any adventitiously introduced materials (e.g., chemical, biochemical, or microbial species) not intended to be part of the manufacturing process of the drug substance or drug product. (TR69) (TR74) Any adventitiously introduced material (e.g., chemi­cal, biochemical) or microorganisms including viruses not intended to be included in the manufacturing process of the drug substance or drug product. (TR83)

A measure of covariation, the square root of the coefficient of determination. (TR57)

A component of the test method that may have a substantial impact on the consistency and reliability of method performance. Features of critical reagents include: 1. A reagent that requires qualification of each new batch prior to routine use in an analytical procedure, or 2. A material whose method performance characteristics may change over time, during handling, or from lot to lot. 3. An analytical reagent that may be purchased only from a single vendor. Reagent Examples: antibodies or enzymes that require titration prior to use, tissue culture treated plates when only one vendor’s plates give acceptable results for a bioassay, growth factors for bioassay cells, conjugated proteins that require custom preparations, or reference or system suitability standards. (TR57) Function related: assay reagents that have been shown through development and/or robustness studies to have the potential to generate measurable differences that can significantly affect assay performance, such as sensitivity, specificity, and precision. (TR57-2)

Molecular variants resulting from changes in the desired product or product-related substance brought about over time and/or by the action of light, temperature, pH, water, etc., or by reaction with an excipient and/or the immediate container/ closure system. Such changes may occur because of manufacture and/or storage (e.g., deamidation, oxidation, aggregation, proteolysis). Degradation products may be either product-related substance or product-related impurities. (TR57)

A method for carrying out carefully planned experiments on a process. Usually, DoE involves a series of experiments that initially involves evaluating many variables and then focuses on a few critical ones. (TR54-4) A structured, organized method for determining the relationship between factors affecting an assay and output of that assay. (TR57) (TR57-2) (TR74) A structured, organized method for determining the relationship between factors affecting a process and the output of that process (8). (TR60)

The active ingredient that is subsequently formulated with excipients to produce the drug product. It can be composed of the desired product, product-related substances, and product- and process-related impurities. It may also contain excipients, including buffers and other components. [Synonyms: bulk drug substance, bulk material, active pharmaceutical ingredient (API)] (TR14) (TR57) (TR74) (TR60) Active pharmaceutical ingredient in a drug product that is responsible for that product’s therapeutic activity.(TR67) (TR82) (TR88) See Active Pharmaceutical Ingredient (API). (TR56)

The largest difference between the results from two methods that is considered as being scientifically and statistically acceptable. (TR57)

Deviation from expected value. Error may be random or systematic. (TR57)

A component of a drug formulation that has no active pharmacologic function. Excipients are commonly used in drug formulations as modulators of pH or osmolality for parenteral administration and as stabilizers for APIs. (TR54-4) An ingredient added intentionally to the drug substance that should not have pharmacological properties in the quantity used. (TR57) Inactive pharmaceutical ingredients in a product formulation that are responsible for the product’s manufacturability and physicochemical attributes. (TR67) (TR88)

Use of an analytical procedure to determine the chemical and biochemical identity of a material. (TR57)

Any component present in the drug substance or drug product that is not the desired product, a product-related substance, or excipient including buffer components. It may be either processor product-related. (TR14) (TR57) (TR74) Any component present in the drug substance or drug product which is not the desired product, a product-related substance, or excipient. It may be either process- or product-related (17). (TR60)

Two or more measurements or observations that are generated from independently prepared samples and do not affect each other. (TR57)

The demonstration of analytical method comparability (AMC) for method replacements. A study to demonstrate that a modification to an existing method either improves or does not significantly change the analytical procedure’s characteristics relative to the methods’ validation and intended use. (TR57)

The documented evidence that the process, operated within established parameters, can perform effectively and reproducibly to produce an intermediate or API (drug substance) meeting its predetermined specifications and quality attributes. (TR14) (TR42) Establishing documented evidence which provides a high degree of assurance that a specific process will consistently produce a product meeting its predetermined specifications and quality attributes. (TR44) The collection and evaluation of data, from the process design stage through commercial production, which establishes scientific evidence that a process is capable of consistently delivering quality products. (TR54) (TR57) (TR74) The collection and evaluation of data, from the pro­cess design stage through commercial production, which establishes scientific evidence that a process is capable of consistently delivering quality product. The documented evidence that the process, op­erated within established parameters, can per­form effectively and reproducibly to produce a medicinal product meeting its predetermined specifications and quality attributes, as described in EMA, EU GMP, Part 1, Annex 15, drug/me­dicinal product. (TR56) EMA: The documented evidence that the process, op­erated within established parameters, can per­form effectively and reproducibly to produce a medicinal product meeting its predetermined specifications and quality attributes. US FDA: The collection and evaluation of data, from the process design stage through commercial pro­duction, which establishes scientific evidence that a process is capable of consistently deliver­ing quality products. (TR60-2) The documented evidence that the process, operated within established parameters, can perform effectively and reproducibly to produce an intermediate or drug substance meeting its predetermined specifications and quality attributes (1, 17). (TR60-3)

A molecular or product characteristic that is selected for its ability to help indicate the quality of the product, such as identity, purity, potency stability and safety. (TR57) (TR57-2) A molecular or product characteristic that is selected for its ability to indicate the quality of the product. Collectively, the quality attributes define identity, purity, potency, and stability of the product, and safety with respect to adventi­tious agents. Specifications measure a selected subset of the quality attributes. (TR60-2)

A systematic process for the assessment, control, communication, and review of risk to the quality of the drug product across the product lifecycle.(TR43)(TR54-2)(TR54-3)(TR57)(TR67)(TR68) Documentation to prove that an installation/ equipment/process is designed and/or tested according to predefined specifications. Documentation may include Design Qualification (DQ), Installation Qualification (IQ), Operational Qualification (OQ) and Performance Qualification (PQ).(TR58) A systematic process for the assessment, control, communication, and review of risks to the quality of the drug (medicinal) product across the product lifecycle.(TR 54-5)(TR 76)(TR88)

The mass of desired solute in the final product solution (either permeate or retentate, depending on the process), divided by the mass of the desired solute in the initial feed solution, expressed as a percentage. [Synonym: yield] (TR15) (TR45) A measure of the amount of analyte carried through the entire sample preparation and assay procedure and expressed as a percentage of the nominal concentration. (TR57)

The addition of a small known amount of a known compound to a standard, sample, or placebo, typically for the purpose of confirming the performance of an analytical procedure or the calibration of an instrument. (TR57)

A test procedure that is able to discern changes in an analyte due to degradation processes. It is capable of accurately measuring changes in the product that can occur under conditions of physical or chemical stress. (TR57)

<p>The statistical measure of the dispersion of the data. (TR57) </p>

A condition in which the set of controls consistently provides assurance of continued process performance and product quality. (TR57)