PDA Technical Glossary

The total number of microorganisms per unit of material prior to sterilization. (TR13) Total number of viable microorganisms on or in a health care product prior to sterilization. (TR22)(TR61)(TR62) A population of viable microorganisms in a fluid prior to sterilizing filtration. (TR26) A measure of the contaminating organisms found in or on a given amount of material before it undergoes a sterilization process. (TR45) (TR70) The number of detectable microorganisms (bacteria and fungi) with which an object is contaminated. It is measured in CFU (colony forming units). (TR47) The number of viable, contaminating microorganisms present on a product immediately prior to decontamination. (TR51) Viable microbial contaminants associated with personnel manufacturing environments (air and surfaces), equipment, product packaging, raw materials (including water), in-process materials, and finished products. (TR 67) (TR 69)

Proof that no adverse interaction between the filter and the process fluid has occurred. (TR26) A term used in relation to the non-reactivity of filter materials with the substance to be filtered. (TR45)

Water treated by passing through both cation- and anion-exchange resin beds, or a mixed-resin bed to remove both positive and negative ions. (TR45)

A chemical component that is removed from a material by application of an artificial or exaggerated force (e.g., solvent, temperature, time). The term extractable is often erroneously used to describe a leachable. (TR14) (TR15) (TR26) (TR41) (TR45) Chemical substances that can be extracted from components of material process fluid contact surfaces by exertion of an exaggerated force (e.g., organic solvent, extreme elevated temperature, ionic strength, pH, contact time, etc.) Extractables may represent most but not all of the potential leachables that may be seen in process fluids. (TR66) Extractables are organic and inorganic chemical entities that can be released from a pharmaceutical packaging/delivery system, packaging component, or packaging material of construction under laboratory conditions. (TR54-4) Organic or inorganic chemical entity that is forced out of container closure system materials and components under laboratory experimental conditions. (TR73)

The fluid and all constituents in a fermentation vessel prior to separation. (TR45)

An experiment to determine flow rate and throughput of a filter type or combination of filters on a specific liquid, usually by using a small area filter, to determine the sizing of a filter system by extrapolation. (TR45)

The pressure measured by a pressure gauge. Typically expressed in units of psig, bar or kilopascal. (TR45) Gauge pressure is the difference between a given fluid pressure and that of the atmosphere. (TR26)

Reduction of microbial contaminants to safe levels as judged by public health requirements for the specific country. (TR13) A significant reduction in bioburden, achieved in chromatography by the use of bactericidal agents, such as sodium hydroxide (NaOH), hydrochloric acid (HCl), ethanol (EtOH), and isopropanol (IPA). (TR14) The process of reducing microbial levels by treatment at less than defined sterilizing conditions. Typically water at 80 °C or a chemical treatment is used to perform sanitization of process components. (TR45) A process that reduces the number of viable microorganisms to a defined level. (TR61) (TR69)

Studies used to assess sizing for the appropriate performance of filter media at increased process volumes. (TR45)