PDA Technical Glossary

PDA Technical Glossary

PDA Technical Reports are highly valued membership benefits because they offer expert guidance and opinions on important scientific and regulatory topics and are used as essential references by industry and regulatory authorities around the world. These reports include terms which explain the material and enhance the reader’s understanding.

The database presented here includes the glossary terms from all current technical reports. The database is searchable by keyword, topic, or by technical report. Each definition provided includes a link to the source technical report within the  PDA Technical Report Portal.

(Please select "All" to restart a filtered Search)

Refine Results
Filter By Technical Report Number
Filter By Technical Report Keyword
Filter By Technical Report Category
    Displaying results 1 - 50 of 141
  • 1
  • 2
  • 3
  • »
Adverse Event (AE) Report
An AE report is a communication to the U.S. FDA of an undesirable sign or symptom associated with use of a drug as required and detailed by 21 CFR 314.80. These reports are logged into the U.S. FDA’s Adverse Event Reporting System (AERS). Drug manufacturers are required to report adverse event information to FDA. These reports may also may be voluntarily submitted to the FDA directly by healthcare professionals or the general public at Med Watch. The reports are reviewed, safety issues are monitored, and data are periodically analyzed and assessed by the Center for Drug Evaluation and Research (CDER). (TR55)
Source:
Adverse Trend
A series of alert-level or action-level excursions that indicates the system or areas are not in control and have the potential to affect the product quality. (TR 70) An increase in the frequency of alert- and action-level excursions or repeated recovery of low levels of microorganisms below the alert level during microbial monitoring or of pharmaceutical ingredient or finished product failure that is indicative of a loss of process control. (TR88)
Source:
Aggregation
Clumping of proteins, viruses, or bacteria that may arise from several mechanisms and may be classified in numerous ways, including soluble/insoluble, covalent/noncovalent, reversible/irreversible, and native/denatured. (TR47)
Source:
Air Removal Test
A test used to evaluate air removal and steam penetration in an empty sterilizer that is used for porous/hard goods load sterilization (e.g., Bowie-Dick Test, DART, Lantor Cube, Browns’ Test). (TR01) (TR 48)
Source:
Airlock
Amplicon
A segment of double stranded DNA formed as the product of polymerase chain reaction or other amplification based techniques such as TMA or NASBA. (TR50)
Source:
Anaerobe
Animal-Derived Raw Materials (Primary)
Contains in the final raw material or uses in the manufacturing process of the final raw material, any raw material derived directly from bovine or other animal tissues, for example, bovine serum, porcine-derived trypsin, and animal-tissue-de­rived hydrolysates. (TR83)
Source:
Aseptic Processing Simulation (APS)
Attribute
A physical, chemical, or microbiological property or characteristic of an input or output material. (TR60)
Source:
Attributes (Process Performance Attribute)
An output variable or outcome that cannot be directly controlled, but is an indicator that the process performed as expected.(Synonym - Process Performance Parameter) (TR60)
Source:
Attributes (Quality Attribute)
A molecular or product characteristic that is selected for its ability to indicate the quality of the product. Collectively, the quality attributes define identity, purity, potency and stability of the product, and safety with respect to adventitious agents. Specifications measure a selected subset of the quality attributes. (TR60)
Source:
Bioburden
The total number of microorganisms per unit of material prior to sterilization. (TR13) Total number of viable microorganisms on or in a health care product prior to sterilization. (TR22)(TR61)(TR62) A population of viable microorganisms in a fluid prior to sterilizing filtration. (TR26) A measure of the contaminating organisms found in or on a given amount of material before it undergoes a sterilization process. (TR45) (TR70) The number of detectable microorganisms (bacteria and fungi) with which an object is contaminated. It is measured in CFU (colony forming units). (TR47) The number of viable, contaminating microorganisms present on a product immediately prior to decontamination. (TR51) Viable microbial contaminants associated with personnel manufacturing environments (air and surfaces), equipment, product packaging, raw materials (including water), in-process materials, and finished products. (TR 67) (TR 69)
Source:
Biological Activity
Property that describes the specific ability or capacity of a product to achieve a defined biological effect. (TR57)
Source:
Biological Indicator (BI)
An inoculated carrier contained within its primary pack ready for use and providing a defined resistance to the specified sterilization process. (TR51)
Source:
Biological Qualification
A component of performance qualification that demonstrates, by use of biological indicators, that the required lethality (FBIO) is achieved consistently throughout the load. (TR1) (TR3) (TR30) A component of performance qualification that demonstrates, by use of biological indicators, that the required lethality (FBIO) or spore log reduction (SLR) is achieved consistently throughout the sterilized or sanitized portion of the SIP system. (TR61)
Source:
Biological Safety Cabinet (BSC)
An enclosed, ventilated workspace with engineering controls designed to remove or minimize exposure to hazardous biological materials. A BSC is a principle device to provide containment of infectious splashes or aerosols generated by many microbiological procedures. BSCs are designed to provide personnel, environmental and product protection when appropriate practices and procedures are followed. A cabinet that is designed to protect the operator and the environment from the hazards of handling infected material and other dangerous biological. (TR62)
Source:
Biological Tests
Biological tests include animal, cell culture, or biochemical based testing that measures a biological, biochemical, or physiological response. (TR38)
Source:
Biomethylation
The enzyme chlorophenol o-methyltransferase responsible for fungal methylation has been isolated in cell-free extracts. Biomethylation, in this context, may be seen as a detoxification mechanism, although it plays a role in the production of mycotoxins by secondary metabolism. Slightly xerophilic fungi frequently associated halophenol biomethylation include Trichoderma longibrachiatum, Trichoderma virgatum, Aspergillus sydowii, and Penicillium islandicum. (TR55)
Source:
Chemistry Manufacturing and Controls (CMC)
The body of information that defines the technical development, manufacturing facility and support utilities; the process equipment and materials used in manufacturing; the manufacturing process itself; the personnel involved in manufacturing and qual­ity; the chemistry of the product; QC in process and release testing, specifications, and stability of the product; all of the controls, documentation, and training necessary to ensure that all of these listed ac­tivities are properly and effectively carried out. (TR56)
Source:
Class I Recall
A situation in which there is a reasonable probability that the use of or exposure to a violative product will cause serious adverse health consequences or death. (TR55)
Source:
Class II Recall
A situation in which use of or exposure to a violative product or may cause temporary or medically reversible adverse health consequences or where the probability of serious adverse health consequence is remote.(TR55)
Source:
Clinician
A physician, psychiatrist, etc., who specializes in clinical work as opposed to one engaged in laboratory or experimental studies. (TR58)
Source:
Commissioning
A well planned, documented and managed engineering approach to the start-up and transfer of facilities, systems and equipment to the end-user that results in a safe and functional environment that meets established design and user requirement specifications. Commissioning precedes Qualification and includes three phases: 1. Inspection, testing, and regulation 2. Adjustment and setting of work 3. Functional testing (TR 3) A prescribed number of activities designed to take equipment and systems from a static, substantially complete state to an operable state. (TR 48) A well planned, documented, managed engineering approach to the start-up and turnover of facilities, systems, and equipment to the end-user, that results in a safe and functional environment that meets established design requirements and stakeholder expectations.(TR 54) (TR 54-5)
Source:
Comparability Protocol
A protocol submitted by an applicant under CFR 601.12(e) and 314.70 (g) that describes the specific tests and validation studies and acceptable limits to be achieved to demonstrate the lack of adverse effect for specified types of manufacturing changes on the identity, strength, quality, purity, and potency of the product as they may relate to the safety or effectiveness of the product. Any such protocols, or change to a protocol, shall be submitted as a supplement requiring approval from FDA prior to distribution of the product. The supplement, if approved, may justify a reduced reporting category for the particular change because the use of the protocol for that type of change reduces the potential risk of an adverse effect. (TR38)
Source:
Comparability Study
An assessment of the similarities between the critical parameters and output results of two or more separate processes or methods. (TR50)
Source:
Comparative Transfer
Transfer of a method that involves the analysis of a predetermined number of samples of the same lot by both the sending and the receiving unit. (TR 57-2)
Source:
Compatibility
Proof that no adverse interaction between the filter and the process fluid has occurred. (TR26) A term used in relation to the non-reactivity of filter materials with the substance to be filtered. (TR45)
Source:
Compatibility (Filter)
The ability of a filter to be used with a particular process fluid without a change in the inherent properties of the filter. (TR41)
Source:
Compendial Procedure
Complaint Files
(a) As defined by 21 CFR Part 211.198- Complaint Files. (b) A written record of each complaint shall be maintained in a file designated for drug product complaints. The file regarding such drug product complaints shall be maintained at the establishment where the drug product involved was manufactured, processed, or packed, or such file may be maintained at another facility if the written records in such files are readily available for inspection at that other facility. 1.The written record shall include the following information, where known: the name and strength of the drug product, lot number, name of complainant, nature of complaint, and reply to complainant .2.Where an investigation under 211.192 is conducted, the written record shall include the findings of the investigation and follow-up. The record or copy of the record of the investigation shall be maintained at the establishment where the investigation occurred in accordance with 211.180. (TR55)
Source:
Component, Primary
Element of the assembled prefilled syringe (needle, plunger stopper and tip closure, or adhesive) directly in contact with the drug. (TR 73)
Source:
Component, Secondary
Element of the assembled prefilled syringe (plunger rod, backstop, or safety system) that interacts with the primary components and provides functionality to the delivery system. (TR 73)
Source:
Composite Membrane
Compounding
A process in which a bulk drug substance is combined with one or more excipients and/or another bulk drug substance to produce a drug product. (TR22) A process wherein bulk drug substance is combined with one or more excipients and/or another bulk drug substance to produce a drug product. (TR62) The preparation, mixing, assembling, altering, packaging, and labeling of a drug, drug-delivery device, or device in accordance with a licensed practitioner’s prescription, medication order, or initiative based on the practitioner/patient/pharmacist/compounder relationship in the course of professional practice. Compounding includes the following: • Preparation of drug dosage forms for both human and animal patients • Preparation of drugs or devices in anticipation of prescription drug orders based on routine, regularly observed prescribing patterns • Reconstitution or manipulation of commercial products that may require the addition of one or more ingredients • Preparation of drugs or devices for the purposes of, or as an incident to, research (clinical or academic), teaching, or chemical analysis • Preparation of drugs and devices for prescriber’s office use where permitted by federal and state law. (TR63)
Source:
Contaminant
Any adventitiously or externally introduced material(s) (e.g., chemical, biochemical, or microbial species) not intended to be part of the process. (TR14) (TR15) (TR70) An undesired impurity of a chemical or microbiological nature that is introduced into a raw material, intermediate, or API (drug substance) during manufacture. (TR14) (TR15) Any adventitiously introduced materials (e.g., chemical, biochemical, or microbial species) not intended to be part of the manufacturing process of the drug substance or drug product. (TR69) (TR74) Any adventitiously introduced material (e.g., chemi­cal, biochemical) or microorganisms including viruses not intended to be included in the manufacturing process of the drug substance or drug product. (TR83)
Source:
Contamination Rate
The percentage of units filled in a process simulation that are positive for microbial growth after incubation. (TR22)
Source:
Continuum of Criticality (As Used for Attributes)
Following comprehensive assessments of scientific evidence and risk, quality attributes are ranked according to the degree of criticality. The continuum, as opposed to binary classifications of Critical and Non-Critical, is thought to “more accurately reflect complexity of structure-function relationships and the reality that there is some uncertainty around attribute classification”. (TR60)
Source:
Continuum of Criticality (As Used for Parameters)
A non-discrete scale where parameters or attributes are evaluated relative to their impact on drug substance and drug product quality. (TR60)
Source:
Control Strategy
A planned set of controls, derived from current product and process understanding, which ensures process performance and product quality. The controls can include parameters and attributes related to drug substance and drug product materials and components, facility and equipment operating conditions, in-process controls, finished product specifications, and the associated methods and frequency of monitoring and control. (TR 54) (TR 60) (TR 54-5) (TR56)
Source:
Corrective Action and Preventative Action (CAPA)
Action to eliminate the cause of a detected nonconformity or other undesirable situation. NOTE: Corrective action is taken to prevent recurrence, whereas preventive action is taken to prevent occurrence. (TR 52) (TR 54-2) (TR 54-3) (TR 54-5) A subsystem used to collect and analyze information, identify and investigate product and quality problems, and take appropriate and effective measures to prevent recurrence of the identified problem (8). (TR88)
Source:
Coupon
A small, generally flat portion of a defined material of construction (such as stainless steel or PTFE) and of a defined surface finish, typically used for laboratory cleaning evaluations and/or for laboratory sampling recovery studies. (TR29) (TR49)
Source:
Critical Area/Critical Zone
An area designed to maintain sterility of sterile materials. Sterilized product, containers, closures, and equipment may be exposed in critical areas. (TR13) (TR22) (TR44) (TR62)
Source:
Critical Control Point
A step at which control can be applied and that is essential to prevent or eliminate a pharmaceutical quality hazard or reduce it to an acceptable level. (TR54-4) (TR61)
Source:
Critical Process (CP)
A process that impacts a critical quality attribute of the intermediate, drug substance or drug product being manufactured and therefore should have established critical process parameters that can be monitored or controlled to ensure that the process produces the desired quality.
Source:
Critical Process Parameter (CPP) or Critical Operational Parameter
A process parameter whose variability has an impact on a critical quality attribute and therefore should be monitored or controlled to ensure the process produces the desired quality. (TR54) (TR54-4) (TR56) (TR54-5) (TR60-2) (TR5 6) (TR 81) An input process parameter that should be controlled within a meaningful operating range to ensure that drug substance critical quality attributes meet their specifications. Although parameters with wide operating ranges may also impact product quality, they are generally easily controlled and not as likely to result in excursions that impact quality and are therefore low risk of occurrence. (TR60-3)
Source:
Critical Reagent
A component of the test method that may have a substantial impact on the consistency and reliability of method performance. Features of critical reagents include: 1. A reagent that requires qualification of each new batch prior to routine use in an analytical procedure, or 2. A material whose method performance characteristics may change over time, during handling, or from lot to lot. 3. An analytical reagent that may be purchased only from a single vendor. Reagent Examples: antibodies or enzymes that require titration prior to use, tissue culture treated plates when only one vendor’s plates give acceptable results for a bioassay, growth factors for bioassay cells, conjugated proteins that require custom preparations, or reference or system suitability standards. (TR57) Function related: assay reagents that have been shown through development and/or robustness studies to have the potential to generate measurable differences that can significantly affect assay performance, such as sensitivity, specificity, and precision. (TR57-2)
Source:
Criticality
A classification of an item (e.g., process, equipment, parameter) that expresses the significance given to the impact of that item, and should therefore be controlled or monitored to ensure product quality, safety or efficacy. (TR54) A classification of an item (e.g., product, process, equipment, parameter) that expresses the significance given to the impact of that item, and should therefore be controlled or monitored to ensure product quality, safety or efficacy. (TR68)
Source:
Date of Manufacture
For small molecules, the date of manufacture of a drug product is considered to be the initial date that an active ingredient has been added during manufacturing. For biologics the date of manufacture can be determined in multiple ways and should be consistent with internal quality systems and the product license application. (TR53)
Source:
Decision Maker(s)
Person(s) with the competence and authority to make appropriate and timely quality risk management decisions.(TR54) (TR54-2)
Source:
    Displaying results 1 - 50 of 141
  • 1
  • 2
  • 3
  • »