
PDA Technical Glossary
PDA Technical Reports are highly valued membership benefits because they offer expert guidance and opinions on important scientific and regulatory topics and are used as essential references by industry and regulatory authorities around the world. These reports include terms which explain the material and enhance the reader’s understanding.
The database presented here includes the glossary terms from all current technical reports. The database is searchable by keyword, topic, or by technical report. Each definition provided includes a link to the source technical report within the PDA Technical Report Portal.
(Please select "All" to restart a filtered Search)
Refine Results
Filter By Technical Report Number
- TR 45: Depth Filtration (7)
- TR 69: Bioburden/Biofilm Management (2)
- TR 70: Cleaning/Disinfection Programs (2)
- TR 22: Aseptic Process Simulation (2)
- TR 41: Virus Filtration (2)
- TR 47: Virus Spikes/Virus Clearance (1)
- TR 51: Biological Indicators (1)
- TR 61: Steam in Place (1)
- TR 62: Manual Aseptic Processes (1)
- TR 67: Objectionable Microorganisms (1)
- TR 13: Environmental Monitoring (1)
- TR 85: Enhanced Test Methods - Visible Particle Detection/Enumeration Closures/Containers (1)
- TR 44: QRM: Aseptic Processes (1)
Filter By Technical Report Keyword
Filter By Technical Report Category
Bioburden
The total number of microorganisms per unit of material prior to sterilization. (TR13) Total number of viable microorganisms on or in a health care product prior to sterilization. (TR22)(TR61)(TR62) A population of viable microorganisms in a fluid prior to sterilizing filtration. (TR26) A measure of the contaminating organisms found in or on a given amount of material before it undergoes a sterilization process. (TR45) (TR70) The number of detectable microorganisms (bacteria and fungi) with which an object is contaminated. It is measured in CFU (colony forming units). (TR47) The number of viable, contaminating microorganisms present on a product immediately prior to decontamination. (TR51) Viable microbial contaminants associated with personnel manufacturing environments (air and surfaces), equipment, product packaging, raw materials (including water), in-process materials, and finished products. (TR 67) (TR 69)
Source:
Bubble Point Test
A test to indicate the maximum pore size of a filter. The differential gas pressure at which a liquid (usually water) is pushed out of the largest pores and a steady stream of gas bubbles is detected from a previously wetted filter under specific test conditions. Used to test filter integrity with specific, validated, pressure values, wetting liquids and temperatures for specific pore-size (and type of ) filters. (TR26)
Source:
Downstream Side (of Filter)
The effluent side of the process step (filter). (TR45) The filtrate or outlet side of the filter. (TR26)
Source:
Endotoxin
Lipopolysaccharides from the cell walls of bacteria, the most potent of which derive from Gram-negative organisms. When injected, they are known to cause a febrile, or fever-producing reaction that can cause severe patient reactions, and on occasion, can be fatal. (TR26) (TR44) Pyrogenic lipopolysaccharide component of Gram-negative bacterial cell walls. (TR69)
Source:
Gamma Irradiation
The process by which a material is rendered sterile by exposing the material to a radioactive source, such as Cobalt 60. (TR70) Ionizing radiation that can be used to sterilize a material. (TR26)
Source:
Integrity Test
Test to determine the functional performance of a membrane filter or container/closure system. (TR22) A nondestructive test used to predict the functional performance of a filter. (TR45) A nondestructive physical test that can be correlated to the bacterial retention capability of a filter/filter assembly. (TR26)
Source:
Microorganism
A microbe; a free-living organism too small to be seen by the naked eye. (TR45) (TR26)
Source:
Particle
Any discrete unit of material structure; a discernible mass having an observable length, width, thickness, size and shape. (TR45) (TR26)
Foreign material which is unintended and either removable from the surface of a primary packaging component or freely moving within a filled and sealed pharmaceutical dosage form. The term particle is used interchangeably with “particulate” and “particulate matter” without any intended difference in meaning. (TR85)
Source:
Particulate
Relating to, or occurring in the form of particles. (TR45) (TR26)
Source:
Permeability
The degree to which a fluid will pass through a permeable substance under specified pressure and temperature conditions. (TR41) (TR26)
Source:
Pore
The channel(s)/path(s) in a membrane through which a fluid or a gas may pass. (TR41) (TR26)
Source:
Surfactant
A soluble compound that reduces the surface tension of a liquid or reduces interfacial tension between two liquids (causing formation or micelles) or between a liquid and a solid. [Synonym:Wetting Agent] (TR45) (TR26)
Source:
Upstream
The influent side of the filter. (TR45) (TR26)