PDA Technical Glossary
PDA Technical Reports are highly valued membership benefits because they offer expert guidance and opinions on important scientific and regulatory topics and are used as essential references by industry and regulatory authorities around the world. These reports include terms which explain the material and enhance the reader’s understanding.
The database presented here includes the glossary terms from all current technical reports. The database is searchable by keyword, topic, or by technical report. Each definition provided includes a link to the source technical report within the PDA Technical Report Portal.
(Please select "All" to restart a filtered Search)
Refine Results
Filter By Technical Report Number
Filter By Technical Report Keyword
Bacteriophage
A bacteriophage is any one of a number of viruses that infect bacteria. The term is commonly used in its shortened form, “phage”. (TR41) (TR 47)
Source:
Bracketing
A demonstration of unit operation performance at two different values of a given parameter (e.g., ionic strength, dwell time or temperature), allowing the use any values of that parameter falling within this range. (TR41)
Source:
Bracketing Approach
A scientific approach for defining product/load characteristics (e.g., viscosity, container sizes, container fill volumes, item sizes, loading configurations) that are tested (in a qualification study or validation study) at upper and/or lower limits. (TR1) (TR61) A validation method that tests the extremes of a process or product. The method assumes the extremes will be representative of all the samples between the extremes. (TR26)
Source:
Breakthrough Limited
A filtration operation resulting in a significant rise in filtrate turbidity accompanied by a small increase in differential pressure. This occurs when the adsorptive capacity of the filter is reached, resulting in the passage of particles smaller than the pore size of the filter that would normally be removed by adsorption. (TR45)
Source:
Brevundimonas Diminuta (B. diminuta)
Small bacteria (0.3–0.4 &mum in diameter by 0.6–0.1 &mum long) used to challenge a sterilizing grade filter during validation testing. [Formerly Pseudomonas diminuta](TR45)
Source:
Bubble Point
The measured differential gas pressure at which a wetting liquid (e.g., water, alcohol, product) is pushed out of the largest pores of a wetted porous membrane, and a steady stream of gas bubbles or bulk gas flow is detected.(TR15) (TR26) The minimum pressure at which a wetting liquid is pressed out of the pore system of a membrane while forming a steady bubble chain. (TR41)
Source:
Bubble Point Test
A test to indicate the maximum pore size of a filter. The differential gas pressure at which a liquid (usually water) is pushed out of the largest pores and a steady stream of gas bubbles is detected from a previously wetted filter under specific test conditions. Used to test filter integrity with specific, validated, pressure values, wetting liquids and temperatures for specific pore-size (and type of ) filters. (TR26)