PDA Technical Glossary

Basic Local Alignment Search Tool; a bioinformatics algorithm for the comparison of sequence data (e.g., translated amino acids [tBLASTx], proteins [BLASTx], or nucleotides [BLASTn]). (TR 71)

Feature that enhances the area to hold the syringe and is usually designed to avoid accidental removal of the plunger from the back. By design, it may also serve as a flange extender to facilitate holding of the syringe during injection. (TR 73)

A copy of current (editable) data, metadata and system configuration settings maintained for recovery including disaster recovery.(TR80)

A copy of one or more electronic files created as an alternative in case the original data or system are lost or become unusable. Backup differs from archival in that back-up copies of electronic records are typically only temporarily stored for the purposes of disaster recovery and may be periodically overwritten. Such temporary back-up copies should not be relied upon as an archival mechanism.(TR80)

Review by the quality control unit of the batch manufacturing record for accuracy and completeness and for absence of derivation from the approved manufacturing and testing processes. The batch record is inclusive of all in-process testing and release records for a batch. (TR88)

A systematic difference in a method that manifests itself as a deviation of the method mean from an expected value. (TR57) Total systematic error, in contrast to random error. Measurement centered on the true result is said to be unbiased or have no systematic error. The distance between the center of a large (infinite) number of measurements and the correct value is the bias. (TR 57-2)

A method used to assess the presence of analytes (chemical or biological) in biological samples (e.g., serum, plasma, etc.). (TR57)

Analysis (as of a drug) to quantify the biological activity(ies) of one or more components by determining its capacity for producing an expected biological activity. (TR57)

The total number of microorganisms per unit of material prior to sterilization. (TR13) Total number of viable microorganisms on or in a health care product prior to sterilization. (TR22)(TR61)(TR62) A population of viable microorganisms in a fluid prior to sterilizing filtration. (TR26) A measure of the contaminating organisms found in or on a given amount of material before it undergoes a sterilization process. (TR45) (TR70) The number of detectable microorganisms (bacteria and fungi) with which an object is contaminated. It is measured in CFU (colony forming units). (TR47) The number of viable, contaminating microorganisms present on a product immediately prior to decontamination. (TR51) Viable microbial contaminants associated with personnel manufacturing environments (air and surfaces), equipment, product packaging, raw materials (including water), in-process materials, and finished products. (TR 67) (TR 69)

Accumulation and subsequent deleterious effects of biological contaminants on engineered products or processes (TR 69)

Manufactured biological active substances and medicinal products involving biological process­es and materials, such as cultivation of cells or extraction from living organisms. (TR56)

Property that describes the specific ability or capacity of a product to achieve a defined biological effect. (TR57)

An inoculated carrier contained within its primary pack ready for use and providing a defined resistance to the specified sterilization process. (TR51)

A product (therapeutic or prophylactic) for human use that has been manufactured in or from a biological source. Examples include recombinant therapeutic proteins or vaccines. Biological medicinal products are also referred to as: biological medicines, biological products, biologics and biologic drugs. (TR 71)

A component of performance qualification that demonstrates, by use of biological indicators, that the required lethality (FBIO) is achieved consistently throughout the load. (TR1) (TR3) (TR30) A component of performance qualification that demonstrates, by use of biological indicators, that the required lethality (FBIO) or spore log reduction (SLR) is achieved consistently throughout the sterilized or sanitized portion of the SIP system. (TR61)

An enclosed, ventilated workspace with engineering controls designed to remove or minimize exposure to hazardous biological materials. A BSC is a principle device to provide containment of infectious splashes or aerosols generated by many microbiological procedures. BSCs are designed to provide personnel, environmental and product protection when appropriate practices and procedures are followed. A cabinet that is designed to protect the operator and the environment from the hazards of handling infected material and other dangerous biological. (TR62)

Biological tests include animal, cell culture, or biochemical based testing that measures a biological, biochemical, or physiological response. (TR38)

An application, filed with the US Food and Drug Administration (FDA), which contains specific information on the manufacturing processes, chemistry, pharmacology, clinical pharmacology and the medical effects of the biologic product (similar function as the Marketing Authorization Application in Europe). (TR56)

The enzyme chlorophenol o-methyltransferase responsible for fungal methylation has been isolated in cell-free extracts. Biomethylation, in this context, may be seen as a detoxification mechanism, although it plays a role in the production of mycotoxins by secondary metabolism. Slightly xerophilic fungi frequently associated halophenol biomethylation include Trichoderma longibrachiatum, Trichoderma virgatum, Aspergillus sydowii, and Penicillium islandicum. (TR55)

Analytical sample taken to establish background value for the analytical measurement which may be subtracted from an experimental value to determine the “true” value. (TR29) (TR49)

Energy required to initiate plunger movement within the syringe barrel upon injection. (TR 73)

Consists of solid, liquid, or frozen product in a bulk container configuration such as a bag, tank, or drum. The product may be in these container configurations between process steps or prior to filling into vials, ampoules, cartridges, or syringes. (TR39)