PDA Technical Glossary
Home / PDA Technical Glossary

PDA Technical Glossary

PDA Technical Reports are highly valued membership benefits because they offer expert guidance and opinions on important scientific and regulatory topics and are used as essential references by industry and regulatory authorities around the world. These reports include terms which explain the material and enhance the reader’s understanding.

The database presented here includes the glossary terms from all current technical reports. The database is searchable by keyword, topic, or by technical report. Each definition provided includes a link to the source technical report within the  PDA Technical Report Portal.

(Please select "All" to restart a filtered Search)

  • All
  • 0
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • J
  • K
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X
  • Y
  • Z
TR 33: Rapid Micro Methods TR 57: Analytical Method Validation
Accuracy
The closeness of the actual test results obtained by the new method to the actual test results obtained by the existing method. (TR33) An analytical procedure expresses the closeness of agreement between the value that is accepted either as a conventional true value or an accepted reference value and the value found. This is sometimes termed trueness. (TR57)
Source:
Linearity
The ability to elicit results that are proportional to the concentration of microorganisms present in the sample within a given range, where accuracy and precision are demonstrated. (TR33) The linearity of an analytical procedure is its ability (within a given range) to obtain test results that are directly proportional to the concentration (amount) of analyte in the sample. (TR57)
Source:
Precision
The degree of agreement among individual test results when the procedure is applied repeatedly to multiple samplings of the same suspension of microorganisms and using different suspensions across the range of the test. Also known as repeatability. (TR33) The closeness of agreement (degree of scatter) between a series of measurements obtained from multiple sampling of the same homogeneous sample under the prescribed conditions. Precision may be considered at three levels: repeatability, intermediate precision, and reproducibility. It is usually expressed as the variance, standard deviation, or coefficient of variation of a series of measurements. (TR57)
Source:
Reproducibility
The precision among multiple laboratories (collaborative studies, usually applied to standardization of methodology). (TR57) The precision between laboratories, for example, through collaborative studies. (TR33)
Source:
Robustness
The measure of capacity to remain unaffected by small, but deliberate, variations in method parameters and provides an indication of its reliability during normal usage. (TR57) (TR33)
Source:
Specificity
The ability of an analytical procedure to accurately measure or detect a target analyte in the presence of other components in the sample matrix. (TR50) The ability to assess unequivocally the analyte in the presence of components that may be expected to be present. Typically these might include impurities, degradants, matrix, etc. Lack of specificity of an individual analytical procedure may be compensated by other supporting analytical procedure(s). (TR57) The ability to detect a range of microorganisms, which demonstrate that the method is fit for its intended use. (TR33)
Source: